Toll Free Phone/Fax: 888-275-9346
|
Step Control User's Manual |
| Default Run Time Display | |
| Phase 2 Programming Display | |
| Diagnostic Selection Display | |
| Switch Diagnostic Display | |
| Memory Diagnostic Display | |
| Operator Keypad | |
| Default Run Time Display |
|
| Display | Name | Range of Values |
| TF | TOTAL FEED | +9.9999 to -9.9999 inches |
| TD | TOTAL DEPTH | 0.0000 to 9.9999 inches |
| DTS | DEPTH TO SPARKOUT | .0000 to .0099 inches |
| NS | NUMBER OF SPARKOUTS | 00 to 99 sparkouts |
| FL | FEED LEFT | .0000 to .0099 inches |
| FR | FEED RIGHT | .0000 to .0099 inches |
| RA | RAPID ADVANCE | 0.0000 to 9.9999 inches |
| IDLE | STATE | IDLE, START, INTERRUPT, RETURN |
| NRET | RETURN MODE | NRET=NON-RETURN; RET=RETURN |
| PL | TABLE MODE | CF=CROSS FEED; PL=PLUNGE |
| Phase 2 Programming Display |
|
|
| Diagnostic Selection Display |
|
|---|
|
| Switch Diagnostic Display |
|
|
| Memory Diagnostic Display |
|
|
| Operator Keypad |
|
|||||
|
| Number keys | 0-9 |
| EXIT/PROG | Exit cycle after pressing interrupt |
| F1 - F4 | Special Function keys (F1 = Diagnostics) |
| Arrow Keys | Move display cursor in arrow direction |
| ENTER | Special Function enter key |
| JOG UP | Move UP 0.0001 inch |
| JOG DOWN | Move DOWN 0.0001 inch |
| RAPID UP | Move UP rapidly |
| RAPID DOWN | Move DOWN rapidly |
| RETURN | Program to return HOME at the end of the cycle |
| NON-RETURN | Program to remain in position at the end of the cycle until RETURN is pressed |
| INTERRUPT | Stop a cycle for reprogramming or termination |
| START/RESTART | Start a new cycle or restart an interrupted cycle |
|
|
