Toll Free Phone/Fax: 888-275-9346
|
|
The STEP CONTROL box can be retro fitted to almost any grinding machine. It is a drop-in replacement for the AUTOSTEP control box by Midland Standard on the Hang 618 grinder. |
|
| FEATURES: | |
4 line by 20 characters per line alpha numeric liquid crystal display (LCD).
Gas and Oil resistant Color keypad for data entry and machine control.
Programmable depth to sparkout from 0.0000 inches to 0.0099 inches.
Programmable number of sparks at each depth to sparkout from 0 to 99 sparks.
Control down feed in either plunge or crossfeed mode.
Programmable down feed when table is at left or right side or both from 0.0000 inches
to 0.0099 inches.
Programmable down feed in crossfeed mode when table is at front or rear travel or
both
from 0.0000 inches to 0.0099 inches.
Programmable for either return or non return of the grinding wheel at the end of a
cycle.
Operator can exit a cycle at any time.
Operator can interrupt a cycle at any time and change any of the programmable fields
and
then restart the cycle from the point of interrupt.
JOG function in 0.0001 inch increments.
Rapid traverse function.
|
|